System menu parameters

Pubblicato 05/07/2008 09:52 PM  |  Aggiornato 03/15/2023 04:20 PM  |  ID risposta 84692

Leggere il codice QR con il dispositivo portatile.

Altri utenti hanno valutato questa risposta come utile
0

Stampa

What are the parameters that can be set on the System menu?

Print Error Report

    Select whether or not to print an error report when a printer error or memory error occurs.

    • Off

    • On

      • Default: Off

Auto Continue

    Specify whether or not to continue printing after a system error. When you enable this setting, specify how long the printer is to select error before resuming print.

    • Off

    • Immediate

    • 1 minute

    • 5 minutes

    • 10 minutes

    • 15 minutes

      • Default: Off

      • When this setting is set to on, and a certain error occurs in the printer while printing out, the job might be cancelled. When a job is cancelled due to error, the printer automatically begins the next job in the queue.

Memory Overflow

    You can specify whether or not to print a memory overflow error report.

    • Do not print

    • Error Information

      • Default: Do not print

Printer Language

    You can specify the printer language.

    • Auto

    • PCL

    • PS

    • PDF

      • Default: Auto

Sub Paper Size

    Specify whether or not to use paper of the alternate size automatically, if paper of the specified size is not loaded. When this setting is set to off, the printer uses paper of any size loaded in the specified tray.

    • Auto

    • Off

      • Default: Auto

Default Printer Lang.

    Select the printer language to use when the printer fails to detect the printer language.

    • PCL

    • PS

    • PDF

      • Default: PCL

Energy Saver

    In Energy Saver mode, electric power consumption is reduced.

    Energy Saver On/Off

    Select whether or not to switch to Energy Saver mode.

    • On

    • Off

      • Default: On

      • When the printer switches to Energy Saver mode, the Power indicator is unlit, but the Online indicator remains lit.

Energy Saver Timer

    Specify the lead time needed to switch to Energy Saver mode.

    • 1 minute

    • 5 minutes

    • 15 minutes

    • 30 minutes

    • 45 minutes

    • 60 minutes

      • Default: 30 minutes

Memory Usage

    Select memory to be used from Font Priority or Frame Priority.

    • Font Priority

    • Frame Priority

      • Default : Frame Priority

B&W Page Detect

    Specify whether to recognize black-and-white images by page or by document. Black-and-while recognition function allows the printer to print monochrome images in monochrome mode even if color printing is specified.

    • Per Page

    • Per Job

      • Default: Per Page

Spool Printing

    Specify whether or not to complete spooling before starting to print.

    • On

    • Off

      • Default: Off

      • Spooling stores a sent print job temporarily in the printer, and then prints it.

      • This menu appears only when the optional hard disk is installed.

RAM Disk

    If the optional hard disk is not installed for PDF Direct Print, select a value of 2 MB or higher.

    This menu appears only when the optional hard disk is not installed.

    • 0 MB

    • 2 MB

    • 4 MB

    • 8 MB

    • 16 MB

    Important

    • When the amount of SDRAM is small and RAM Disk is set to 16 MB, printing may not be possible depending on the print job and duplex printing may be canceled. If this happens, increase the amount of SDRAM, or set RAM Disk to 8 MB or less.

      • Default: 4 MB

      • This menu appears only when the optional hard disk is not installed.

Auto Email Notify

    Specify whether or not to send an error message to a preset e-mail address when an error occurs in the printer.

    • Off

    • On

    Important

    • After changing the setting, turn off the power of the printer briefly, and then turn it on again.

      • Default: On

La risposta è stata utile?

La valutazione è stata inviata, inviare suggerimenti su come rendere la risposta più utile.
Answer
System menu parameters
Informazioni sul contatto (required)
You rated this answer [Not Helpful]
Troubleshooting information
How to / General Usage information
Product specifications
Parts information
Other
Continue my current search
Adjust my search
I'm finished searching
I'd like to contact Support